Microchip Technology megaAVR 0 Series Manual page 36

5.8.2.6 Application Code End
Name: APPEND
Offset: 0x07
Reset: -
Property: -
Bit 7
Access
R
Reset 0
Bits 7:0 – APPEND[7:0] Application Code Section End
These bits set the end of the application code section in blocks of 256 bytes. The end of the application
code section should be set as BOOT size plus application code size. The remaining Flash will be
application data. A value of 0x00 defines the Flash from BOOTEND*256 to end of Flash as application
code. When both FUSE.APPEND and FUSE.BOOTEND are 0x00, the entire Flash is BOOT section.
©
2018 Microchip Technology Inc.
6 5
R R
0 0
4 3
APPEND[7:0]
R R
0 0
Datasheet Preliminary
®
megaAVR 0-Series
Memories
2 1
R R
0 0
DS40002015A-page 36
0
R
0