CLI Command Reference
Format
Mode
set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time. The time is set for the
system, on a particular interface or VLAN. This is the amount of time in seconds that a switch
waits for a query to be received on an interface before the interface is removed from the list of
interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0
indicates an infinite time-out, i.e. no expiration.
Default
Format
Modes
Format
Mode
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the
system, on a particular interface or a VLAN.
Format
Modes
Format
Mode
set igmp mrouter
This command configures the VLAN ID (
enabled.
Format
Mode
no set igmp mrouter
This command disables multicast router mode for a particular VLAN ID (
Format
Mode
set igmp mrouter interface
This command configures the interface as a multicast router interface. When configured as a
multicast router interface, the interface is treated as a multicast router interface in all VLANs.
100
© 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
no set igmp maxresponse <vlan_id>
VLAN Config
0
set igmp mcrtrexpiretime <0-3600>
Global Config
Interface Config
set igmp mcrtrexpiretime <vlan_id> <0-3600>
VLAN Config
no set igmp mcrtrexpiretime
Global Config
Interface Config
no set igmp mcrtrexpiretime <vlan_id>
VLAN Config
set igmp mrouter <vlan_id>
Interface Config
no set igmp mrouter <vlan_id>
Interface Config
) that has the multicast router mode
<vlanId>
).
<vlan_id>