Table of Contents
Advertisement
DXS-3410 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
5. Switch Management
Management Options
Users can configure, manage, and monitor the software features of the Switch through the Command Line Interface
(CLI), Web User Interface (Web UI), or third-party SNMP software.
Command Line Interface (CLI)
The CLI grants access to all software features accessible on the Switch. These features can be enabled, configured,
disabled, or monitored by entering the appropriate command following the CLI prompt and pressing the Enter key. The
Console port provides an Out-Of-Band (OOB) connection to the CLI, while the LAN ports offer an in-band connection
to the CLI using Telnet or SSH.
NOTE: For more information about the CLI, refer to the DXS-3410 Series CLI Reference Guide.
Connecting to the Console Port
The Console port is used to establish a connection with the Switch's CLI. Connect the DB9 connector of the console
cable (provided in the package) to the Serial (COM) port of the computer. Connect the RJ45 connector of the console
cable to the Console port on the Switch.
For accessing the CLI via the Console port, Terminal Emulation Software such as PuTTY or Tera Term is required.
The Switch utilizes a connection speed of 115200 bits per second with no flow control enabled.
After the boot sequence completed, the CLI login screen is displayed.
NOTE: The default username and password for the CLI and Web UI is admin.
Figure 5-1 Console Connection Settings
19
Advertisement
Table of Contents
