Optional) Specifying The Default Vlan Of A Trunk Interface - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
l
----End

3.4.6 (Optional) Specifying the Default VLAN of a Trunk Interface

Context
Do as follows on the S9300 where you specify the default VLAN of a trunk interface.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
port link-type trunk
The link type of the interface is set to trunk.
By default, the interface type is hybrid.
Step 4 Run:
port trunk pvid vlan vlan-id
The default VLAN of the trunk interface is specified.
By default, VLAN 1 is the default VLAN of trunk interfaces.
----End
Issue 03 (2009-08-20)
Adding a QinQ interface to a VLAN in the interface view
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
3. Run:
port link-type dot1q-tunnel
The link type of the interface is set.
By default, the interface type is hybrid.
4. Run:
port default vlan vlan-id
The default VLAN of the interface is set.
By default, VLAN 1 is the default VLAN for all interfaces.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 VLAN Configuration
3-13