Density Adjustment Of Graphic Lines - Toshiba e-STUDIO 5540C Service Manual

6.3.19 Density adjustment of graphic lines (1200 dpi)
This adjustment is available only when "Distinguish Thin Lines" of the printer driver is selected.
Color mode
8242-0
Color/Black
8242-1
Color mode
8243-0
Color/Black
8243-1
8243-2
8243-3
Notes:
Be sure to set the values of the upper and lower limit properly so that they are not set in reverse.
The line density adjustment codes with black (8242-0, 8243-0 and 8243-1) are in common for
both the color and black modes.
<Procedure>
The procedure is the same as that of  P. 6-52"6.3.2 Gamma balance adjustment (Black Mode)".
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
Code
When "Distinguish Thin Lines" is selected in the screen selection
menu of the printer driver, the density of the line in Black in the
line density range specified by "05-8243-0" or "05-8243-1" can
be adjusted.
The larger the value is, the darker the line density becomes.
Acceptable value: 0 to 5 (Default: 3)
When "Distinguish Thin Lines" is selected in the screen selection
menu of the printer driver, the density of the line in Yellow,
Magenta and Cyan in the line density range specified by "05-
8243-2" or "05-8243-3" can be adjusted.
The larger the value is, the darker the line density becomes.
Acceptable value: 0 to 5 (Default: 1)
Code
The effective range (lower limit) of the
density adjustment for the line in Black can
be set.
Acceptable value: 0 to 255 (Default: 1)
The effective range (upper limit) of the
density adjustment for the line in Black can
be set.
Acceptable value: 0 to 255 (Default: 200)
The effective range (lower limit) of the
density adjustment for the line in Yellow,
Magenta or Cyan can be set.
Acceptable value: 0 to 255 (Default: 1)
The effective range (upper limit) of the
density adjustment for the line in Yellow,
Magenta or Cyan can be set.
Acceptable value: 0 to 255 (Default: 255)
Remarks
Remarks
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
6 - 68
<Adjustment Mode (05)>
The density range
selected in the
upper and lower
limit is adjusted with
05-8242-0.
The density range
selected in the
upper and lower
limit is adjusted with
05-8242-1.