Switching Regulator (Ps) - Toshiba e-STUDIO 5540C Service Manual

9.1.15

Switching regulator (PS)

(1) Take off the rear cover.
 P. 4-7"4.1.18 Rear cover"
(2) Take off the PSU cover [1].
(3) Disconnect 4 connectors.
(4) Release the harness from 1 harness clamp.
(5) Remove 2 screws and take off the duct.
(6) Take off the FIL board cover.
 P. 9-6"9.1.7 LGC board case"
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
REPLACEMENT OF PC BOARDS/HDD
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
9 - 18
[ 1 ]
Fig. 9-52
Fig. 9-53
[1]
Fig. 9-54