Carriage Home Position Sensor (S6); Platen Sensor (S7); Slg Board (Slg) - Toshiba e-STUDIO 5540C Service Manual

4.3.16

Carriage home position sensor (S6)

(1) Take off the top rear cover.
 P. 4-7"4.1.20 Top rear cover"
(2) Remove the seal.
(3) Disconnect 1 connector. Release the latches
and take off the carriage home position
sensor.
4.3.17

Platen sensor (S7)

(1) Remove the RADF.
(2) Take off the top rear cover.
 P. 4-7"4.1.20 Top rear cover"
(3) Disconnect 1 connector. Release the latches
and take off the platen sensor.
4.3.18

SLG board (SLG)

(1) Open the RADF.
(2) Take off the lens cover.
 P. 4-16"4.3.2 Lens cover"
(3) Disconnect 10 connectors, remove 4 screws
and take off the SLG board.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
Platen sensor
SLG board
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 34
Carriage
home position sensor
Fig. 4-93
Fig. 4-94
Fig. 4-95