Toshiba e-STUDIO 5540C Service Manual page 346

4.9.1 Fuser unit
Notes:
Fuser unit [1] has a receiving dish that
prevents gear abrasion powder from
dropping into the machine. Take off fuser [1]
without substantial shaking or tilting.
(1) Open the duplexing unit.
(2) Remove 1 screw and release the lock of the
handle grips.
(3) Loosen 2 screws and then take off the fuser
unit by holding its handle grips.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
Handle
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 172
[ 1 ]
Fig. 4-493
Fig. 4-494
Fig. 4-495