Image Quality Control Unit; Image Position Aligning Sensor (Front); Image Position Aligning Sensor (Center) - Toshiba e-STUDIO 5540C Service Manual

Image Quality Control
4.8
4.8.1

Image quality control unit

(1) Take off the transfer cam unit.
 P. 4-163"4.7.25 2nd transfer roller
contact/release detection sensor (S50)"
(2) Remove 2 shoulder screws and then take off
the image quality control unit.
4.8.2 Image position aligning sensor (front) (S20)
(1) Take off the image quality control unit
 P. 4-165"4.8.1 Image quality control unit"
(2) Remove 2 screws and take off the image
position aligning sensor (front).
4.8.3 Image position aligning sensor (center) (S21)
(1) Take off the image quality control unit
 P. 4-165"4.8.1 Image quality control unit"
(2) Remove 2 screws and take off the image
position aligning sensor (center).
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Shoulder screw
Fig. 4-483

Image position aligning sensor (front)

Fig. 4-484

Image position aligning sensor (center)

Fig. 4-485
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 165
Image quality control unit
DISASSEMBLY and REPLACEMENT
4