Toshiba e-STUDIO 5540C Service Manual page 210

(7) Disconnect 4 flat cables from the LGC board.
Then remove 2 flat cable clamps on the
frame.
Notes:
When installing, be sure to connect the flat
cables at the proper positions.
Notes:
When installing, be sure to align its black line
with the edge of the equipment.
(8) Remove 2 screws and then take off the EPU
cooling fan duct.
(9) Release 1 latch and then take off the ozone
suctioning fan duct.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
C K
Y M
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 36
Fig. 4-99
Black line
Fig. 4-100
Fig. 4-101
Fig. 4-102