Radf Board; Radf Board Bracket - Toshiba e-STUDIO 5540C Service Manual

4.11.53 RADF board (RADF)
(1) Take off the RADF rear cover.
 P. 4-258"4.11.3 RADF rear cover"
(2) Disconnect 11 connectors. Remove 4 screws
and take off the RADF board.
Notes:
When replacing the RADF board, be sure to
perform the original reading start sensor
adjustment.
 P. 6-126"6.12.8 Original reading start
sensor adjustment"

4.11.54 RADF board bracket

(1) Take off the RADF rear cover.
 P. 4-258"4.11.3 RADF rear cover"
(2) Disconnect 11 connectors.
(3) Disconnect 1 connector. Take off the harness
clamp. Remove 4 screws and take off the
RADF board bracket.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-878
Fig. 4-879
Fig. 4-880
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 301
LED3
LED3
DISASSEMBLY and REPLACEMENT
4