Printer-Related Image Dimensional Adjustment - Toshiba e-STUDIO 5540C Service Manual

6.1.7

Printer-related image dimensional adjustment

The printer related adjustment is performed by using the printed out grid pattern.
Adjustment
Tolerance
A 200 ± 0.5mm
B 52 ± 0.5mm
C 200 ± 0.5mm
D 52 ± 0.5mm
E 52 ± 0.5mm
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
1
6
B, E
Fig.6-14
Refer to "[A] Reproduction ratio of primary scanning direction (Image clock fine
adjustment (Printer))"
Refer to "[B] Image position of primary scanning direction (Laser writing start
position (Printer))"
Refer to "[C] Reproduction ratio of secondary scanning direction (Fine adjustment
of transfer belt motor rotation speed (Printer))"
Refer to "[D] Image position of secondary scanning direction (Laser writing start
position)"
Refer to "[E] Primary scanning data laser writing start position at duplexing"
A
Detail of adjustment
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
6 - 16
21