Toshiba e-STUDIO 5540C Service Manual page 1025

Check item
Setting
[71AB] Timeout error during certificate acquisition from SCEP server
Classification
Maintenance error
Check item
Setting
[71AC] File save error during certificate acquisition from SCEP server
Classification
Maintenance error
Check item
Setting
[71B0] Software package file decryption failure
Classification
Maintenance error
Check item
Setting
8.3.29 Network error
[8000] Static IPv4 address conflict
Classification
Network error
Check item
Setting
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Check SCEP server and the SCEP setting (automatic) on the
TopAccess screen as follows: TopAccess Administration 
Security  Certificate Management
Timeout error occurred during certificate acquisition from
SCEP server.
Check SCEP server and the SCEP setting (automatic) on the
TopAccess screen in the following procedure: TopAccess
Administration  Security  Certificate Management
File save error occurred during certificate acquisition from
SCEP server.
File saving failed for some reason. If the error still occurs after
rebooting the equipment, start up using the following
procedure:[3] + [C] + [POWER]  3. HDD formatting 
Reinstallation of software or HDD replacement
Software package file decryption failed.
Software package file may have a problem or may be
corrupted. Check the software package file and then
reattempt the installation.
IPv4 address overlaps.
Check if the same IP address is not used by other machine.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 269
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
ERROR CODE and TROUBLESHOOTING
8