In The Case Of Bypass Feeding - Toshiba e-STUDIO 5540C Service Manual

Default
Moved Transport position moved to the
by rear side
1 mm
2 mm
3 mm
<In the case of bypass feeding>
(1) Move the side guides halfway to the center.
(2) Loosen 1 screw.
(3) Move the rear side guide to the front or rear
side.
* The position of the screw is adjustable
within the diameter of the long screw
hole; from - 3 mm to + 3 mm.
(4) Fix the 1 screw.
Notes:
The paper transport position is moved the
same amount and direction as the side
guide.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
Transport position moved to the
front side
Fig.6-47
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
6 - 90
Fig.6-48