Toshiba e-STUDIO 5540C Service Manual page 482

(5) Separate the finisher from the equipment
while pulling the lever.
Notes:
If MJ-1104 is used, separate the finisher and
then pull out the saddle stitch unit.
(6) Take off the cover.
(7) Remove 2 screws and then take off the
cover.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 308
Fig. 4-13
Fig. 4-14
Fig. 4-15
Fig. 4-16