Upper Exit Section Cooling Fan-1/2; Lower Exit Section Cooling Fan-1/2 - Toshiba e-STUDIO 5540C Service Manual

Exit / Reverse / Duplex Section
4.10
4.10.1 Upper exit section cooling fan-1(F32) / Upper exit section cooling
fan-2 (F33)
(1) Take off the receiving tray.
 P. 4-3"4.1.8 Receiving tray"
(2) Remove 2 screws and disconnect 2
connectors. Then take off the upper exit
section cooling fan unit.
(3) Release the harness from the clamp.
(4) Take off the upper exit section cooling fan-1
and the upper exit section cooling fan-2 by
removing 2 screws from each.
4.10.2 Lower exit section cooling fan-1(F34) / Lower exit section cooling
fan-2 (F35)
(1) Take off the receiving tray.
 P. 4-3"4.1.8 Receiving tray"
(2) Take off the left top cover.
 P. 4-4"4.1.10 Left top cover"
(3) Lift up the reverse path cover. Then take off
the lower exit section cooling fan-1 and the
lower exit section cooling fan-2 by removing
2 screws and disconnecting 1 connector of
each.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
Upper exit section cooling fan unit
Upper exit section
cooling fan-1
Lower exit section cooling fan-1
Lower exit section cooling fan-2
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 206
Fig. 4-596
Upper exit section
cooling fan-2
Fig. 4-597
Fig. 4-598