Toshiba e-STUDIO 5540C Service Manual page 763

Error code Classification
E076 Other paper jam
E090
E091
E0A0
E110 Paper misfeeding
E120
E130
E140
E150
E160
E180
E190
E200 Paper transport jam
E210
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Contents
Tandem LCF media type mis-setting jam:
The media type setting of the tandem LCF
is incorrect.
Image data delay jam: Image data to be
printed cannot be prepared.
Motor-ON time-out jam: The equipment
does not operate normally because
abnormality occurred on an interface
between the SYS board and engine
firmware.
Image transport ready time-out jam: Image
data to be printed cannot be sent.
ADU misfeeding (Paper not reaching the
registration sensor): The paper which has
passed through ADU does not reach the
registration sensor during duplex printing.
Bypass misfeeding (Paper not reaching the
bypass feed sensor): Paper fed from the
bypass tray does not reach the bypass feed
sensor.
1st drawer misfeeding (Paper not reaching
the 1st drawer feed sensor): The paper fed
from the 1st drawer does not reach the 1st
drawer feed sensor.
2nd drawer misfeeding (Paper not reaching
the 2nd drawer feed sensor): The paper fed
from the 2nd drawer does not reach the 2nd
drawer feed sensor.
3rd drawer misfeeding (Paper not reaching
the 3rd drawer feed sensor): The paper fed
from the 3rd drawer does not reach the 3rd
drawer feed sensor.
4th drawer misfeeding (Paper not reaching
the 4th drawer feed sensor): The paper fed
from the 4th drawer does not reach the 4th
drawer feed sensor.
Option LCF misfeeding (Paper not reaching
the LCF feed sensor): Paper fed from the
LCF does not reach the LCF feed sensor.
LCF misfeeding (Paper not reaching the
LCF feed sensor): The paper fed from the
LCF does not reach the LCF feed sensor.
1st drawer transport jam (Paper not
reaching the registration sensor): The
paper does not reach the registration
sensor after it has passed the 1st drawer
feed sensor.
2nd drawer transport jam (Paper not
reaching the registration sensor): The
paper does not reach the registration
sensor after it has passed the 1st drawer
feed sensor.
8 - 7
Troubleshooting
P. 8-69
P. 8-69
P. 8-70
P. 8-71
P. 8-45
P. 8-45
P. 8-46
P. 8-47
P. 8-47
P. 8-48
P. 8-48
P. 8-49
P. 8-52
P. 8-52
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8