Drawer Feed Sensor; Drawer Transport Sensor - Toshiba e-STUDIO 5540C Service Manual

4.5.20 Drawer feed sensor (S78/S86/S94/S102)
(1) Take off the drawer feeding unit.
 P. 4-55"4.5.14 Drawer feeding unit"
(2) Remove 1 screw and 1 clamp. Then take off
the sensor bracket.
(3) Disconnect 1 connector and remove 1 screw.
Then take off the drawer feed sensor.
Notes:
When installing the sensors, make sure that
the protrusion of each sensor is inserted into
the hole of the bracket securely.
4.5.21 Drawer transport sensor (S77/S85/S93/S101)
(1) Take off the drawer feeding unit.
 P. 4-55"4.5.14 Drawer feeding unit"
(2) Disconnect 1 connector and remove 1 screw.
Then take off the sensor bracket.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
Blacket
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 60
Blacket
Fig. 4-172

Drawer feed sensor

Fig. 4-173
Fig. 4-174