Toshiba e-STUDIO 5540C Service Manual page 802

Check item
Bypass pick-up solenoid
ADU board
PFC board
Drive unit, Rollers
Replace parts
Bypass feed sensor
Bypass motor
Bypass pick-up solenoid
ADU board
PFC board
ADU roller
Rollers
[E130] 1st drawer misfeeding (paper not reaching the 1st drawer feed sensor)
Classification
Paper misfeeding
Check item
1st drawer feed sensor
Feed motor
PFC board
Drive unit, Rollers
Replace parts
1st drawer feed sensor
Feed motor
PFC roller
Rollers
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
• Solenoid check
(Perform the output check: 03-1254)
• Connector check
• Harness check
• Connector check (CN490, CN496, CN498)
• Board check
• Connector check (CN509)
• Harness check
• Board check
• Gear check
• Roller check
The paper fed from the 1st drawer does not reach the 1st
drawer feed sensor.
• Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[H])
• Connector check
• Harness check
• Motor check
(Perform the output check: 03-120)
• Connector check
• Harness check
• Connector check (CN512, CN513)
• Board check
• Gear check
• Roller check
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
8 - 46
Measures
Remarks
Error item
Measures
Remarks