Toshiba e-STUDIO 5540C Service Manual page 860

Check item
Finisher
Front saddle stapler drive unit
Saddle controller board
Replace parts
Front saddle stapler drive unit
Saddle controller board
[EF12] Saddle Stitch Finisher stapling error (rear)
Classification
Finisher jam (Saddle section)
Check item
Finisher
Rear saddle stapler drive unit
Saddle controller board
Replace parts
Rear saddle stapler drive unit
Saddle controller board
[EF13] Saddle stitch unit paper holding home position detection error
Classification
Finisher jam (Saddle section)
Check item
Finisher
Paper holding home position sensor
(S38)
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
• Is there any paper remaining on the paper transport path
in the Finisher or the equipment, or on the finishing tray?.
• Is the jam released by taking off the front staple cartridge
from the Finisher and removing the staple sheet slid from
the staple case?
• Unit check
• Connector check
• Harness check
• Connector check (CN3)
• Board check
• Is there any paper remaining on the paper transport path
in the Finisher or the equipment, or on the finishing tray?.
• Is the jam released by taking off the rear staple cartridge
from the Finisher and removing the staple sheet slid from
the staple case?
• Unit check
• Connector check
• Harness check
• Connector check (CN3)
• Board check
• Is there any mechanical problem when the paper holding
cam is rotated?
• Sensor check
• Connector check
• Harness check
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
8 - 104
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures