Transfer Belt Paper Clinging Detection Sensor - Toshiba e-STUDIO 5540C Service Manual

Notes:
Match the boss of the gear with the hole of
the cover when installing the motor.
4.5.48 Transfer belt paper clinging detection sensor (S47)
(1) Pull out the transfer belt unit.
 P. 4-139"4.7.1 Pulling out the transfer belt
unit"
(2) Remove 1 screw and slide the middle guide
and then release 2 hooks.
(3) Disconnect 1 connector and then take off the
middle guide.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
Middle guide
Middle guide
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 78
Fig. 4-227
Fig. 4-228
Fig. 4-229