Original Exit Solenoid - Toshiba e-STUDIO 5540C Service Manual

4.11.33 Original exit solenoid (SOLR3)
(1) Take off the RADF board bracket.
 P. 4-258"4.11.3 RADF rear cover"
(2) Disconnect 1 connector.
(3) Remove 2 screws and take off the original
exit solenoid with the bracket.
(4) Remove 2 screws and take off the bracket
from the original exit solenoid.
Notes:
Before taking off the solenoid, read the scale.
When reinstalling, align it with the
corresponding position on the scale.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 288
Fig. 4-839
Fig. 4-840
Fig. 4-841