Initialize The Db; Displaying Various Data In The Hdd - Toshiba e-STUDIO 5540C Service Manual

[D] Initialize the DB (Initialize DB)
In case that particular service calls occur or there is a possibility of damage to the databases, each one
can be initialized.
File System(F/S) Recovery Mode -> Initialize DB
Please Select Partition
1. LDAP DB
2. Log DB(Job,Msg)
Explanation for each item
• 1: Initializes address book data and the user information database.
• 2: Initializes job log data and the message database.
Remark:
The selected databases are initialized and recreated in the next normal startup.
[E] Displaying various data in the HDD (SMART Info)
Various data in the HDD can be displayed. (Data equivalent to the setting contents of 08-9065 are
displayed.)
When this item is selected, data in the HDD embedded in the equipment are displayed.
File System(F/S) Recovery Mode -> SMART Info
Please Select
Model : Hitachi xxxxxxxxxxx
ID NAME
01 Read Error Rate
02 Throughput Performance
03 Spin Up Time
.
.
.
Remark:
• NAV: Normalized Attribute Value
Indicates the value of the specified HDD condition as compared to the manufacturer's
optimum value.
• Worst: Worst Ever Normalized Attribute Value
Indicates the worst value of NAV permitted by the manufacturer.
Notes:
The values of NAV and Worst should be treated as a rough reference since their basis may differ
depending on the specification of HDD manufacturers.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
0: Main menu
Fig.5-18
1: PrevPage 2:NextPage
VALUE
0
0
15
.
.
.
Fig.5-19
5 - 29
0: Main menu
Serial : xxxxxxxxx
NAV Worst
100 100
100 100
253 253
. .
. .
. .
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SELF-DIAGNOSTIC MODE
5