1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. All in One Printer
  5. E-studio 5520c
  6. Quick start manual

Toshiba e-studio 5520c Quick Start Manual

Hide thumbs Also See for e-studio 5520c:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Toshiba e-studio 5520c

Summary of Contents for Toshiba e-studio 5520c

  • Page 2 ©2008 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TTEC. No patent liability is assumed, however, with respect to the use of the information contained herein.
  • Page 3 Preface Thank you for purchasing the TOSHIBA Multifunctional Digital Color Systems. This Quick Start Guide describes the preparation of the operation, the basic and advanced usage of this equipment. Be sure to read this manual before you use this equipment. Keep this manual handy and retain it for future reference.

  • Page 4: Lineup Of Our Manuals

    Lineup of Our Manuals We have provided you with these manuals for the operation of this equipment. Select and read the manual best suited to your needs. Some of these manuals are printouts and others are PDF files recorded in the User Documentation CD-ROM. Printouts Quick Start Guide (This manual) This Quick Start Guide describes the preparation of the operation, the basic and advanced usage of this equipment.
  • Page 5 TopAccess Guide This TopAccess Guide describes procedures for remote setup and management of this equipment from a web-based utility, the “TopAccess”. Troubleshooting Guide This Troubleshooting Guide describes how to troubleshoot the problems that could occur while you are using the equipment. Network Fax Guide This Network Fax Guide describes the operations of the N/W-Fax Driver.

  • Page 6: How To Read This Manual

    How to Read This Manual Symbols in this manual In this manual, some important items are described with the symbols shown below. Be sure to read these items before using this equipment. Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or WARNING serious damage, or fire in the equipment or surrounding assets.

  • Page 7: Installation Space

    Installation Space Make sure that there is enough space around the system to facilitate changing of parts, maintenance and clearing paper jams. If there is insufficient space, some operations, such as bypass feeding, will become difficult and the Multifunctional Digital Color Systems could even break down. 0 cm 270 cm ( 0.3"...

  • Page 8: Table Of Contents

    CONTENTS Preface .................. Lineup of Our Manuals .
  • Page 9 Chapter PREPARATIONS Items Included in This Product ........8 CD-ROM .

  • Page 10: Chapter Preparations

    Chapter 1 PREPARATIONS Items Included in This Product The items included in this product are shown below. The following items are included in the e-STUDIO5520C/520C/530C Multifunctional Digital Color Systems. Check that you have all the items. Items included in the product Quick Start Guide (this guide) Safety Information Client Utilities CD-ROM...

  • Page 11: Cd-Rom

    File downloader N/W-Fax driver AddressBook Viewer Remote Scan driver WIA driver TOSHIBA NDPS Gateway e-Filing Backup/Restore Utility For Macintosh PPD file for Mac OS X 0.2. to Mac OS X 0.5.x For UNIX UNIX filter (Solaris, HP-U, AIX, Linux, SCO)

  • Page 12: Client Software

    WPF applications created for Windows Vista. TOSHIBA NDPS Gateway TOSHIBA NDPS Gateway enable to configure the NDPS objects in servers running NetWare 5. with Support Pack 7 or higher, or NetWare .0/.5. PPD file for Macintosh This printer driver enables users to print documents from Macintosh computers (Mac OS X0.2. to...
  • Page 13 Client Software Client software for the network management TopAccess TopAccess enables you to view the device information, monitor jobs, create templates and manage address book from your computers using a browser. The device can be set up and maintained with the administrator’s function from your computers using a browser.

  • Page 14: Description Of Each Component

    Chapter 1 PREPARATIONS Description of Each Component This section describes the names and operations of the components and options. Front / Right side Reversing Automatic Document Feeder Paper size indicator The stack of originals is scanned one sheet at a time. Both Drawer sides of the originals can be scanned.
  • Page 15 Description of Each Component Left side / Inner side Platen sheet Original scale &P.0 “Regular Maintenance” Use this to check the size of an original placed on the original glass. Original glass Touch panel Use this to copy three-dimensional originals, book-type originals and special paper such as OHP film or tracing Use this to set and operate various types of functions such paper, as well as plain paper.
  • Page 16 This Finisher enables sort/group finishing and stapling. The Hole Punch Unit (optional, MJ-02) can be installed in this Finisher. Other options available are as follows. Contact your service technician or Toshiba product distributors for details. FAX Unit (GD-1270) Bluetooth Module (GN-2010) This is a unit for using the equipment as a Fax machine.
  • Page 17 Description of Each Component Data Overwrite Enabler (GP-1070) External Interface Enabler (GS-1020) This is an enabler to erase the data stored temporarily when This enables the EWB function in this equipment. copying, printing, scanning, Fax, internet Fax or network Fax is performed.

  • Page 18: Control Panel

    Chapter 1 PREPARATIONS Control panel Use the buttons on the control panel for various operations and settings in the equipment. PRINT DATA lamp [SCAN] button This lamp lights during reception of data such as print Use this button to use the scanning function. data.
  • Page 19 Description of Each Component [ACCESS] button [INTERRUPT] button Use this button when the department code or user Use this button to interrupt print processing and perform information has been set. If this button is pressed after a copy job. The interrupted job is resumed by your copying, etc., the next user cannot use functions such as pressing this button again.
  • Page 20 Chapter 1 PREPARATIONS Adjustment of the height and angle of the control panel Adjusting the height of the control panel The height of the control panel is adjustable for your convenience. Adjustment of the angle of the control panel The control panel is adjustable at any angle, right or left, up or down.

  • Page 21: Touch Panel

    Description of Each Component Touch panel When the power is turned ON, the basic menu for the copying function appears on this touch panel. The status of the equipment is also displayed on the touch panel with messages and illustrations. The menu shown at the time of turning the power ON can be changed to one for functions other than copying, for example, Fax function.
  • Page 22 Chapter 1 PREPARATIONS Clearing functions selected When you press the selected button, the function which has been selected is cleared. Or the selected setting is cleared automatically by the automatic function clear* when the equipment has been left inactive for a specified period of time. Automatic function clear: This function works when a specified period of time has passed since the last paper exit or the last entry of any button.
  • Page 23 Description of Each Component Setting letters The following menu appears when the entry of any letter is required for the operations of scanning, e-Filing, template and Internet Fax. Use the buttons on the touch panel for letter entry and use the digital keys on the control panel for number entry. After entering the letters, press [OK].

  • Page 24: Turning Power On/Off

    Chapter 1 PREPARATIONS Turning Power ON/OFF This section explains how to turn the power ON and OFF. Turning the power ON If the MAIN POWER lamp is not lit, open the main power switch cover and turn the power ON with the main power switch.
  • Page 25 Turning Power ON/OFF Turning the power OFF (Shutdown) When turning OFF the power of the equipment, be sure to shut it down according to the procedure below. Check the following three points before shutdown. • No jobs should be left in the print job list. •...

  • Page 26: Energy Saving Mode

    Chapter 1 PREPARATIONS Energy saving mode This equipment supports two energy saving modes; the Automatic Energy Save mode and the Sleep mode. Automatic Energy Save The equipment enters the Automatic Energy Save mode automatically after a specified period of time since its last use.

  • Page 27: When Department Or User Management Is Used

    When Department or User Management is Used When Department or User Management is Used When the equipment is managed with the department or user management function, users need to enter the department code or user information before making copies, etc. Department management You can restrict users or manage copy volumes made by an individual group or department in your company using the department codes.

  • Page 28: User Management

    Chapter 1 PREPARATIONS User management Users of the equipment can be limited and the available functions and past record of each user can be controlled by using the user management function. When the equipment is managed under this function, turn the power ON and enter the information required (e.g.
  • Page 29 When Department or User Management is Used The menu for user authentication appears. MFP local authentication, LDAP authentication Windows Domain Authentication The domain name previously set by the network administrator is displayed in [DOMAIN]. If the domain name belonging to your organization is not displayed, press [DOMAIN] and select it.
  • Page 30 Chapter 1 PREPARATIONS Press [USER NAME]. Enter the user name (maximum 128 letters) and then press [OK]. Press [PASSWORD].
  • Page 31 When Department or User Management is Used Enter the password (maximum 64 letters) and then press [OK]. Press [OK].

  • Page 32: Placing Paper

    Chapter 1 PREPARATIONS Placing Paper This section explains how to set paper in the drawers of the equipment. Pull out the drawer and release the lock. Place paper in the drawer. Set the end guide so that it matches the paper Set the side guides so that they match the paper size.
  • Page 33 Chapter BASIC OPERATION Basic Copying Operation ........32 Basic Fax Operation .

  • Page 34: Chapter Basic Operation

    Chapter 2 BASIC OPERATION Basic Copying Operation The basic color copying procedure is as follows. Press the [COPY] button to use the copying functions. Place the original(s). Original glass Reversing Automatic Document Feeder Key in the desired number of copy sets, and then press the [START] button. Refer to the Copying Guide for details.
  • Page 35 Basic Copying Operation In this case To stop copying Press the [STOP] button on the control panel and [MEMORY CLEAR] on the touch panel. Refer to “Chapter 2 HOW TO MAKE COPIES” in the Copying Guide for details. To perform Interrupt copying Press the [INTERRUPT] button on the control panel.

  • Page 36: Basic Fax Operation

    Chapter 2 BASIC OPERATION Basic Fax Operation The basic procedure for sending a Fax is as follows (The Fax Unit is optional). Press the [FAX] button to use the Fax functions. Place the original(s). Original glass Reversing Automatic Document Feeder Specify the Fax number using the digital keys or in the address book, and then press [SEND] on the touch panel.
  • Page 37 Basic Fax Operation In this case If you make a mistake when dialing the Fax number Press the [CLEAR] button on the control panel to delete all the Fax numbers you entered. Or press [BACK SPACE] on the touch panel to delete them one by one. Refer to “Chapter 2 SENDING/RECEIVING A FAX”...

  • Page 38: Basic Scanning Operation

    Chapter 2 BASIC OPERATION Basic Scanning Operation The basic scanning procedure is as follows. Press the [SCAN] button to use the scanning functions. Place the original(s). Original glass Reversing Automatic Document Feeder Specify the location where the scanned data will be stored, and then press [SCAN] on the touch panel.
  • Page 39 Basic Scanning Operation In this case To store the scanned data in e-Filing Press [e-FILING] on the touch panel. Refer to “Chapter 2 BASIC OPERATION” in the Scanning Guide and “Chapter 2 OPERATIONS WITH THIS EQUIPMENT” in the e-Filing Guide for details. To store the scanned data in a shared folder or USB device Press [FILE/USB] on the touch panel.

  • Page 40: Basic E-Filing Operation

    Chapter 2 BASIC OPERATION Basic e-Filing Operation The basic e-Filing procedure is as follows. Press the [e-FILING] button to use the e-filing functions. Storing documents The originals are stored as e-Filing documents in this equipment as well as being copied. Place the original(s).

  • Page 41: Printing Documents

    Basic e-Filing Operation Printing Documents The procedure for printing documents stored in e-Filing is as follows. Press the box button in which the documents are stored. If the password is set in the box, enter the password and press [OK] on the touch panel. Select the document you want to print, and then press [PRINT] on the touch panel.

  • Page 42: Basic Printing Operation

    Chapter 2 BASIC OPERATION Basic Printing Operation The procedure for printing with a PS3 printer driver from a Windows application is as follows. Select [Print] in the [File] menu of the application. Select the printer driver of the equipment, and then click [Preferences]. Set the print options and click [OK].
  • Page 43 Basic Printing Operation In this case To specify paper size or number of copy sets Click the [Basic] tab in the property dialog box of the printer driver. Refer to “Chapter 2 PRINTING FROM WINDOWS” in the Printing Guide for details. To specify 2-sided printing or N-up printing Click the [Finishing] tab in the property dialog box of the printer driver.

  • Page 44: Basic Menu Operation

    The template which the user logging in can use is This is enabled when the External Interface Enabler (GS- displayed. 020) is installed. Contact your service technician or Toshiba product distributors for details. Total print counter The total print counter (Black/Full color) of the user logging in is displayed.

  • Page 45: Replacement Of Supplies

    Chapter REPLACEMENT OF SUPPLIES Replacing Toner Cartridge ........ Replacing Waste Toner Box .

  • Page 46: Replacing Toner Cartridge

    Chapter 3 REPLACEMENT OF SUPPLIES Replacing Toner Cartridge The procedure for replacing the toner cartridge is as follows. Open the front cover. Remove the color toner cartridge you want to replace. Shake the new toner cartridge well to loosen the Pull out the seal.

  • Page 47: Replacing Waste Toner Box

    Replacing Waste Toner Box Replacing Waste Toner Box The procedure for replacing the waste toner box is as follows. Open the front cover of the Finisher, pull the knob to Open the waste toner box cover and remove the unlock the Finisher, and then separate the Finisher. waste toner box.

  • Page 48: Adding Staples

    Chapter 3 REPLACEMENT OF SUPPLIES Adding Staples The procedure for adding staples of the Finisher (optional) is as follows. Finisher (Optional: MJ-1103/MJ-1104) Open the front cover of the Finisher. Take off the staple cartridge. Take the empty staple case out of the staple Install a new staple case into the staple cartridge.

  • Page 49: Adding Staples

    Adding Staples Saddle stitch unit (Optional: MJ-1104) Open the front cover of the Finisher, and then pull Take out two empty staple cartridges. out the saddle stitch unit. Take the empty staple case out of the staple Install a new staple case into the staple cartridge cartridge.

  • Page 51: Chapter 4 Advanced Functions / Troubleshooting

    Chapter ADVANCED FUNCTIONS / TROUBLESHOOTING Advanced Functions ..........50 Messages or Other Indications on Touch Panel .

  • Page 52: Advanced Functions

    Chapter 4 ADVANCED FUNCTIONS / TROUBLESHOOTING Advanced Functions This section describes the advanced functions. COPY SCAN e-FILING PRINT Making a booklet stapled at the center in 2-sided printing EXAMPLE How to print 12 pages of a A4 (LT) size file in 2- sided printing so that each 2 pages are printed on 1 A3 (LD) sheet, and then stapled at the center for making 10 sets of booklet...
  • Page 53 Advanced Functions COPY SCAN e-FILING PRINT Copying different-sized originals and stapling copies EXAMPLE The procedure of how to copy 5 sets of different-sized originals (A4 or LT: 1 sheet, A3 or LD: 4 sheets) and staple the copies is ( LT ) ( LD ) ( LT ) ( LD ) as follows.
  • Page 54 Chapter 4 ADVANCED FUNCTIONS / TROUBLESHOOTING COPY SCAN e-FILING PRINT Attaching the scanned data to an E-mail. EXAMPLE The procedure for attaching the scanned data to an E-mail and sending it to the specified E-mail address is as follows. Place the original(s). Press [E-MAIL] on the touch panel.
  • Page 55 Advanced Functions COPY SCAN e-FILING PRINT Requesting a password for receiving a fax EXAMPLE The procedure for requesting a password when printing a received Fax using the ITU- T mailbox function is as follows. The Fax Unit (optional) is required. Password Press the [ADVANCED] tab, and then [ITU MAILBOX].
  • Page 56 Chapter 4 ADVANCED FUNCTIONS / TROUBLESHOOTING COPY SCAN e-FILING PRINT Copying or scanning originals without blank sheets EXAMPLE To copy or scan originals without blank sheets, follow the setting below before copying or scanning them. (In this case, two blank originals are omitted when six originals are copied or scanned.) When copying Press the [EDIT] tab, and then press...
  • Page 57 Advanced Functions COPY SCAN e-FILING PRINT Adding date and time to document files EXAMPLE The procedure for printing a document file stored in e-Filing with the date and time added at its bottom is as follows. 2008 . 7 . 10 11:11 Select the box in which the desired document is stored.
  • Page 58 Chapter 4 ADVANCED FUNCTIONS / TROUBLESHOOTING COPY SCAN e-FILING PRINT Printing a PDF file stored in the USB device. EXAMPLE The procedure for printing 1 set of a PDF file stored in the USB device is as follows. Connect the USB device to the USB port.
  • Page 59 Advanced Functions COPY SCAN e-FILING PRINT Copying or scanning originals which are to have their periphery whitened EXAMPLE To whiten the dark area on the copied image around thick originals such as booklets, follow the setting below before copying or scanning originals. When copying Press the [EDIT] tab, and then on the basic menu for the copying functions.

  • Page 60: Messages Or Other Indications On Touch Panel

    Chapter 4 ADVANCED FUNCTIONS / TROUBLESHOOTING Messages or Other Indications on Touch Panel This section describes the messages, symbols and error codes displayed on the touch panel of the equipment. Alert message indication area Messages appear when paper has run out, etc. Symbols blinking on the touch panel Symbols such as paper jam, call service, etc.

  • Page 61: Chapter 5 Maintenance & Specifications

    Chapter MAINTENANCE & SPECIFICATIONS Regular Maintenance ......... . . 0 Specifications of Equipment .

  • Page 62: Regular Maintenance

    Chapter 5 MAINTENANCE & SPECIFICATIONS Regular Maintenance The cleaning method for the equipment is as follows. We recommend you to clean the following items weekly, so that the originals can be scanned in unsoiled conditions. Be careful not to scratch the parts that you are cleaning. Notes •...

  • Page 63: Specifications Of Equipment

    Specifications of Equipment Specifications of Equipment The specifications of the equipment are as follows. Acceptable paper Feeder Media type Weight Maximum sheet capacity Paper size  - 80 g/m Approx. 00 sheets ( g/m , 7 lb. Bond) PLAIN 7 - 23 lb. Bond Approx.
  • Page 64 When paper is exiting, remove it every time about 10 sheets have accumulated on the receiving tray or the tray of the Finisher (optional). Automatic duplex copying is not available. Only Toshiba-recommended transparency should be used. Using any other one may cause a malfunction.
  • Page 65 Specifications of Equipment e-STUDIO5520C/6520C/6530C Specifications Model name FC-5520C/FC-520C/FC-530C Type Console type Original glass Fixed Printing (copying) system Indirect electro photographic method Developing system 2-component magnetic brush developing Fixing method External heating STF fusing system Photosensor type Flat surface scanning system Original scanning system (When the Reversing Automatic Document Feeder is installed: Fixed scanning system by feeding the original)
  • Page 66 50 mm (.2") (W) x 778 mm (30.3") (D) Storage capacity Max. 000 sheets or until the memory is full (Toshiba’s own chart) • This specification varies depending on the printing conditions and the environment. • Specifications and appearance are subject to change without notice in the interest of product improvement.

  • Page 67: Specifications Of Options

    Specifications of Options Specifications of Options The specifications of the options are as follows. External Large Capacity Feeder Model name MP-250 Acceptable paper size A or LT Paper weight  - 25 g/m , 7 - 0 lb. Index Maximum capacity 2500 sheets (80 g/m , 20 lb.
  • Page 68 *1 For hard drives, MB means 1 million bytes. (Total HDD accessible capacity may vary depending on operating environment.) Refer to the GD-1250/GD-1260/GD-1270 Operator's Manual for FAX Unit for details of the Fax Unit (GD-270). Toshiba-recommended paper is used for the values above. Specifications and appearance are subject to change without notice in the interest of product improvement.

  • Page 69: Index

    INDEX INDEX A, B Platen sheet ............13 [POWER] button .
  • Page 71 Printed in China FC-5520C/6520C/6530C OME08000400...
  • Page 72 6LH09566000 R071220E8700-TTEC 2008 TOSHIBA TEC CORPORATION All rights reserved 2008-06...

This manual is also suitable for:

E-studio 6520cE-studio 6530c

Table of Contents