Toshiba e-STUDIO 5540C Service Manual page 863

Check item
Additional folding carrier
Additional folding home position
sensor (S39)
Additional folding motor (M20)
Saddle controller board
Replace parts
Additional folding home position
sensor (S39)
Additional folding motor (M20)
Saddle controller board
[EF19] Saddle paper folding jam
Classification
Finisher jam (Saddle section)
Check item
Finisher
Exit transport sensor (S41)
Saddle controller board
Replace parts
Exit transport sensor (S41)
Saddle controller board
[EF20] Saddle stacker jam
Classification
Finisher jam (Saddle section)
Check item
Finisher
Stacker paper detection sensor (S30) •
Saddle controller board
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
• Is there any mechanical problem when the additional
folding carrier is moved?
• Sensor check
• Connector check
• Harness check
• Motor check
• Connector check
• Harness check
• Connector check (CN18, CN19)
• Board check
• Is there any paper remaining in the paper transport path in
the equipment or the saddle stitch section of the Finisher?
• Sensor check
• Connector check
• Harness check
• Connector check (CN19)
• Board check
• Is there any paper remaining in the paper transport path in
the equipment or the saddle stitch section of the Finisher?
Sensor check
• Connector check
• Harness check
• Connector check (CN19)
• Board check
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 107
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures
ERROR CODE and TROUBLESHOOTING
8