Pressure Roller Contact/Release Sensor - Toshiba e-STUDIO 5540C Service Manual

4.9.14 Pressure roller contact/release sensor (S48)
(1) Take off the pressure roller cover.
 P. 4-173"4.9.2 Pressure roller cover"
(2) Remove 1 screw and take off the sensor
bracket [1].
(3) Remove the film from the sensor bracket [1].
(4) Take off the pressure roller contact/release
sensor [2] and disconnect the connector.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
[ 1 ]
[ 1 ]
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 194
Fig. 4-562
[ 2 ]
Fig. 4-563