Toshiba e-STUDIO 5540C Service Manual page 367

(8) Remove 2 screws and take off the bracket of
the pressure roller edge thermistor.
(9) Remove 1 screw each and take off each
thermistor bracket of the pressure roller
center thermistor and the pressure roller side
thermistor.
(10) Disconnect a connector.
(11) Remove 1 screw and take off the pressure
roller edge thermistor.
(12) Remove 1 screw each and take off the
pressure roller center thermistor and the
pressure roller side thermistor from each
bracket.
Notes:
When installing, make sure that the side of
the thermistor is correct.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-558
Pressure roller edge thermistor
Fig. 4-559
Pressure roller
center thermistor
Fig. 4-560
Fig. 4-561
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 193
Pressure roller
side thermistor
DISASSEMBLY and REPLACEMENT
4