Lower Paper Exit Sensor - Toshiba e-STUDIO 5540C Service Manual

(6) Take off the upper exit tray paper full
detection sensor [1] from the sensor bracket.
(7) Release the harness from the clamp and
then disconnect the connector.
(8) Remove 1 screw and disconnect the
connector. Then take off the sensor bracket
[2].
(9) Take off the upper paper exit sensor [3] from
the sensor bracket.
4.10.6 Lower paper exit sensor (S63)
(1) Take off the left top cover.
 P. 4-4"4.1.10 Left top cover"
(2) Lift up the reverse path cover and then
disconnect each connector of the lower exit
section cooling fans-1 and -2. Then release a
harness from a clamp.
(3) Remove 2 screws and disconnect a
connector. Then take off the lower paper exit
roller unit.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
[ 1 ]
Fig. 4-605
Fig. 4-606
Lower paper exit roller unit
Fig. 4-607
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 209
[ 2 ] [ 3 ]
DISASSEMBLY and REPLACEMENT
4