Toshiba e-STUDIO 5540C Service Manual page 820

Replace parts
Rollers
[EB50] Paper remaining on the transport path due to multiple feeding
Classification
Paper transport jam
Check item
1st drawer feed sensor
(When the paper is fed from the 1st
drawer:)
Bypass feed sensor
(When the paper is fed from the
bypass feed unit:)
ADU exit sensor
(When the paper is fed from the
ADU:)
Registration sensor
(When the paper is fed from the
ADU:)
1st drawer feed sensor
(When the paper is fed from any of
the 2nd drawer, PFP or LCF:)
2nd drawer feed sensor
(When the paper is fed from any of
the 2nd drawer, PFP or LCF:)
ADU board
LGC board
Drive unit, Rollers
Replace parts
1st drawer feed sensor
Bypass feed sensor
ADU exit sensor
Registration sensor
1st drawer feed sensor
2nd drawer feed sensor
ADU board
LGC board
Rollers
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
The multiple feeding of preceding paper caused the
misfeeding of upcoming paper.
• Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[H])
• Connector check
• Harness check
• Sensor check
(Perform the input check: 03-[SCAN]ON/[3]/[A])
• Connector check
• Harness check
• Sensor check
(Perform the input check: 03-[SCAN]ON/[3]/[G])
• Connector check
• Harness check
• Sensor check
(Perform the input check: 03-[ALL]OFF/[4]/[B], 03-
[COPY]ON/[5]/[H])
• Connector check
• Harness check
• Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[H])
• Connector check
• Harness check
• Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[G])
• Connector check
• Harness check
• Connector check (CN211, CN213)
• Board check
• Connector check (CN337, CN338, CN347, CN348)
• Board check
• Gear check
• Roller check
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
8 - 64
Remarks
Error item
Measures
Remarks