4.11.42 Original width detection sensor-1 (SR6)
(1)
Take off the feeder lower guide unit.
P. 4-292"4.11.39 Feeder lower guide unit"
(2)
Disconnect 1 connector. Lift the actuator,
release 2 latches and take off the original
width detection sensor-1.
4.11.43 Original registration sensor (SR5)
(1)
Take off the feeder lower guide unit.
P. 4-292"4.11.39 Feeder lower guide unit"
(2)
Disconnect 1 connector. Release 2 latches
and take off the original registration sensor.
4.11.44 Original exit sensor (SR12)
(1)
Take off the assembly of the exit guide and
the exit/reverse guide.
P. 4-264"4.11.11 Exit guide / Exit/reverse
guide / Reading end guide"
(2)
Remove 2 screws and take off the 2 leaf
springs.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
Original width detection sensor-1
Original registration sensor
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 294
Fig. 4-857
Fig. 4-858
Fig. 4-859