Bypass Pickup Roller - Toshiba e-STUDIO 5540C Service Manual

(3) Disconnect 1 connector and release 3
latches. Then take off the bypass paper
sensor.
4.5.5

Bypass pickup roller

(1) Remove 2 screws and then take off the SFB
upper cover.
(2) Remove 1 clip and pull out the shaft. Then
take off the bypass pickup roller.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-132
Fig. 4-133
Bypass pickup roller
Fig. 4-134
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 47
Bypass paper sensor
SFB upper cover
DISASSEMBLY and REPLACEMENT
4