Toshiba e-STUDIO 5540C Service Manual page 799

[E5A0] Jam not reaching the upper paper exit sensor
Classification
Paper transport jam
Check item
Upper paper exit sensor
Bridge unit transport exit motor
PFC board
DRV board
Drive unit, Rollers
LGC board
Replace parts
Upper paper exit sensor
exit motor
PFC board
DRV board
LGC board
[E970] Jam not reaching the lower paper exit sensor
Classification
Paper transport jam (Relay transport
section)
Check item
Lower paper exit sensor
Bridge unit transport exit motor
PFC board
DRV board
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Stop jam at the upper paper exit sensor.
• Sensor check
(Perform the input check: 03-[COPY]ON/[7]/[A],
03-[ALL]OFF/[1]/[E])
• Connector check
• Harness check
• Motor check
(Perform the output check: 03-136)
• Connector check
• Harness check
• Connector check (CN515,CN516)
• Board check
• Connector check (CN537, CN539, CN540)
• Board check
• Gear check
• Roller check
• Connector check (CN309)
• Board check
Paper transported from the bridge unit does not reach the
lower paper exit sensor.
• Sensor check
(Perform the input check: 03-[COPY]ON/[5]/[G],
03-[ALL]OFF/[4]/[C])
• Connector check
• Harness check
• Motor check
(Perform the output check: 03-136)
• Connector check
• Harness check
• Connector check (CN500, CN515, CN516)
• Board check
• Connector check (CN537, CN539, CN540)
• Board check
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 43
Error item
Measures
Remarks
Error item
Measures
ERROR CODE and TROUBLESHOOTING
8