4.6.5
Blade side seal
(1)
Take off the drum cleaning blade.
P. 4-97"4.6.4 Drum cleaning blade"
(2)
Take off the blade side seal.
Notes:
When replacing the blade side seals, follow
the procedure below.
1. Move the blade to the front side and then
install it with 2 screws.
2. Install the 2 blade side seals following the
standard shown in the figure.
3. After the side seals are attached, move
the bracket retaining the blade and check
that it is neither caught nor comes up on
to the side seal.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
Side seal
Blade
0~0.3 mm
Blade side seal
Drum cleaning blade
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 98
Blade side seal
Fig. 4-285
Side seal
Blade
0~0.3 mm
Fig. 4-286
Fig. 4-287