4.10.31 Bridge unit cooling fan (rear) (F7)
(1)
Take off the upper fans (left) and (right).
P. 4-23"4.3.9 Upper exhaust fan (left)
(F29)"
P. 4-25"4.3.10 Upper exhaust fan (right)
(F30)"
(2)
Remove 2 screws and then take off the
bracket.
(3)
Release the harness from the clamp and
then disconnect the connector.
(4)
Remove 1 screw and then take off the bridge
unit cooling fan (rear) by sliding it.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 236
Fig. 4-685
Fig. 4-686
Fig. 4-687