Toshiba e-STUDIO 5540C Service Manual page 619

6.4.2 Density adjustment
Adjusts the center density and the variation of density adjustment buttons.
Original mode
Color
Printed
Mode
Text
image
Color 8340 8341
8344 8345
8348 8349
Black
Original mode
Text/
Text Photo
Photo
7444 7445 7446
7456 7457 7458
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in a code and press the [START] button.
(3) Key in an adjustment value (acceptable values: 0 to 255).
(To correct a value once keyed in, press the [CLEAR] button.)
(4) Press the [OK] or [INTERRUPT] button to store the value in memory.  The equipment goes
back to the ready state.
(5) Let the equipment restart and perform the scanning.
(6) If the desired image quality has not been attained, repeat step (1) to (5).
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Item to be
Custo
adjusted
Photo m
mode
8342 8380 Manual density
center value
8346 8381 Manual density
light step value
8350 8382 Manual density
dark step value
Gray Item to be
Scale adjusted
Custom
mode
7475 7447 Manual density
center value
7478 7459 Automatic
density
6 - 71
<Adjustment Mode (05)>
Remarks
The larger the value is, the darker the
image becomes.
Acceptable values: 0 to 255 (Default: 128)
Sets the changing amount by 1 step at the
density adjustment on the control panel.
The larger the value is, the lighter the light
side becomes.
Acceptable values: 0 to 255 (Default: 20)
Sets the changing amount by 1 step at the
density adjustment on the control panel.
The larger the value is, the darker the dark
side becomes.
Acceptable values: 0 to 255 (Default: 20)
<Adjustment Mode (05)>
Remarks
The larger the value is, the darker the
image
becomes.
Acceptable values: 0 to 255
(Default: 128)
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
6