Tension Roller; 2Nd Transfer Facing Roller - Toshiba e-STUDIO 5540C Service Manual

4.7.12

Tension roller

(1) Take off the transfer belt.
 P. 4-146"4.7.7 Transfer belt"
(2) Remove 2 collars [1].
(3) Move the bearing [1] to the inner side and
then take off the tension roller [2].
4.7.13

2nd transfer facing roller

(1) Take off the transfer belt.
 P. 4-146"4.7.7 Transfer belt"
(2) Remove 2 screws and take off the lever
assembly.
Notes:
When the transfer belt unit or the lever
assembly is replaced, be sure to perform the
adjustment of the degree of parallelization for
the transfer belt unit.
Do not remove the 2 red screws unless the
adjustment is necessary.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-442
[ 1 ]
Fig. 4-443
Lever assembly
Fig. 4-444
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 151
[ 1 ]
[ 2 ]
DISASSEMBLY and REPLACEMENT
4