4.11.22 Exit intermediate roller
(1)
Take off the exit/reverse guide.
P. 4-264"4.11.11 Exit guide / Exit/reverse
guide / Reading end guide"
(2)
Remove 2 screws and take off the guide.
(3)
Remove 1 E-ring, 1 pulley, 1 pin and 1
bushing.
(4)
Remove 1 E-ring and 1 bushing and take off
the exit intermediate roller.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-808
Fig. 4-809
Bushing
E-ring
Fig. 4-810
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 277
Bushing
Pulley
Pin
E-ring
Exit intermediate roller
DISASSEMBLY and REPLACEMENT
4