Error Code “M00” Is Displayed While Updating Firmware - Toshiba e-STUDIO 5540C Service Manual

8.4.16 Error code "M00" is displayed while updating firmware
Check item
Switching regulator
LGC board
Replace parts
Switching regulator
LGC board
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
• Connector check (CN404, CN405)
• Harness check
• Fuse check (F210)
• Board check
• Connector check (CN301, CN302)
• Harness check
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 293
Measures
Remarks
ERROR CODE and TROUBLESHOOTING
8