Toshiba e-STUDIO 5540C Service Manual page 365

(5) Release the harness from the harness guide,
remove 2 screws and take off harness guide-
2 [1].
Notes:
When installing, do not let the harness be
caught.
(6) Disconnect a connector of the fuser belt
edge thermistor.
(7) Release a harness from 7 clamps.
(8) Remove 1 screw, release the harness from
the harness clamp and take off the fuser belt
edge thermistor.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-552
Fig. 4-553
Fuser belt edge thermistor
Fig. 4-554
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 191
[ 1 ]
Clamp
Clamp
DISASSEMBLY and REPLACEMENT
4