4.5.36
Feed/transport drive unit
(1)
Open the PFC board case.
P. 9-8"9.1.9 PFC board case"
(2)
Disconnect 3 connectors and remove 4
screws. Then take off the feed/transport
drive unit.
4.5.37
Transport motor-1 (M40)
(1)
Take off the feed/transport drive unit.
P. 4-70"4.5.36 Feed/transport drive unit"
(2)
Remove 4 screws and a plate.
(3)
Remove 2 screws and then take off the
transport motor-1.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
Feed/transport drive unit
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 70
Fig. 4-203
Plate
Fig. 4-204
Transport motor-1
Fig. 4-205