Toshiba e-STUDIO 5540C Service Manual page 869

Check item
PFC board
Replace parts
Tray-up motor
Tray-up sensor
PFC board
[C180] LCF tray-up motor abnormality
Classification
Paper feeding system related service
call
Check item
LCF tray-up motor
LCF tray-up sensor
LCF tray bottom sensor
PFC board
Replace parts
LCF tray-up motor
LCF tray-up sensor
LCF tray bottom sensor
PFC board
[C1A0] LCF end fence motor abnormality
Classification
Paper feeding system related service
call
Check item
LCF end fence motor
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
• Connector check (CN504, CN505, CN506)
• Board check
The LCF tray-up motor is not rotating or the LCF tray is not
moving normally. (the case that paper can be fed from any
drawer except the LCF
• Motor check
(Perform the output check: 03-257)
• Connector check
• Harness check
• Sensor check
(Perform the input check: 03-[COPY]ON/[9]/[F])
• Connector check
• Harness check
• Sensor check
(Perform the input check: 03-[SCAN]ON/[2]/[E])
• Connector check
• Harness check
• Connector check (CN505, CN507)
• Board check
The LCF end fence motor is not rotating or the LCF end fence
is not moving normally. (the case that paper can be fed from
any drawer except the LCF)
• Motor check
(Perform the output check: 03-256)
• Connector check
• Harness check
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 113
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures
ERROR CODE and TROUBLESHOOTING
8