Toshiba e-STUDIO 5540C Service Manual page 837

Check item
RADF
RADF
Read end roller
Original reading end sensor
RADF board
Drive unit, Rollers
Replace parts
Original reading end sensor
RADF board
Roller
[E729] Stop jam at the original reading end sensor
Classification
RADF jam
Check item
Read end roller
Original reading end sensor
RADF board
Drive unit, Rollers
Replace parts
Original reading end sensor
RADF board
Roller
[E731] Stop jam at the original exit sensor
Classification
RADF jam
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
• Check the RADF position adjustment.
 P. 6-112"6.12.1 RADF position adjustment"
• Check the Adjustment of the Reversing Automatic
Document Feeder (RADF).
 P. 6-112"6.12 Reversing Automatic Document Feeder
(RADF)"
• Cleaning
• Sensor check
(Perform the input check: 03-[FAX]ON/[5]/[D])
• Connector check
• Harness check
• Connector check (CN75)
• Board check
• Gear check
• Roller check
Perform the 05-3210
Read end roller
• Cleaning
• Sensor check
(Perform the input check: 03-[FAX]ON/[5]/[D])
• Connector check
• Harness check
• Connector check (CN75)
• Board check
• Gear check
• Roller check
Perform the 05-3210
Read end roller
The trailing edge of the original does not pass the original
exit/reverse sensor after its leading edge has reached this
sensor.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 81
Measures
Remarks
Error item
Measures
Remarks
Error item
ERROR CODE and TROUBLESHOOTING
8