Drawer Detection Sensor - Toshiba e-STUDIO 5540C Service Manual

(8) Remove 1 E-ring and slide the bearing to the
inner side. Then take off the transport roller.
4.5.19 Drawer detection sensor (S73/S81/S89/S97)
(1) Take off the drawer feeding unit.
 P. 4-55"4.5.14 Drawer feeding unit"
(2) Disconnect 1 connector and remove 1 screw.
Then take off the sensor cover.
(3) Release 3 latches and take off the drawer
detection sensor.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-169
Fig. 4-170

Drawer detection sensor

Fig. 4-171
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 59
Transport roller
Sensor cover
DISASSEMBLY and REPLACEMENT
4