5.13 List print mode (9S)
5.13.1
Operation procedure
[ 1 ] Print out
[9][START]
(Code)
[POWER]
101: Adjustment mode (05)
102: Setting mode (08)
(Code)
103: PM support mode
104: Stored information of pixel counter (toner cartridge reference)
105: Stored information of pixel counter (service technician reference)
106: Error history (Maximum 1000 items)
107: Error history (Latest 80 items)
108: Firmware update log (Maximum 200 items)
110: Power-ON/OFF log (Maximum 100 items)
111: Version list
114: Total counter list
121: (05) adjustment value difference
122: (08) setting value difference
[ 2 ] CSV output (USB)
[9][START]
Connect
(Code)
[POWER]
USB
201: Adjustment mode (05)
202: Setting mode (08)
(Code)
203: PM support mode
204: Stored information of pixel counter (toner cartridge reference)
205: Stored information of pixel counter (service technician reference)
206: Error history (Maximum 1000 items)
208: Firmware update log (Maximum 200 items)
210: Power-ON/OFF log (Maximum 100 items)
211: Version list
212: Engine firmware log * Manufacture Purpose Only
214: Total counter list
221: (05) adjustment value difference
222: (08) setting value difference
223: Job log/Message log
300: All CSV files
Notes:
Precautions when storing information into USB media
•
When storing the setting information of the equipment into a USB media, be sure to obtain
permission from a user in advance.
•
When storing the setting information of the equipment into a USB media, the information is
printed out in a CSV format. Handle and manage the information with extra care.
•
Do not lose or leak the setting information of the equipment.
•
Do not use the setting information of the equipment for purposes other than maintenance or
product services.
•
Provide the information promptly if a user requires so.
•
The buttons on the control panel keep blinking while data are being stored in the USB media.
Do not disconnect the USB media while data are being stored.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
[START]
[Digital keys]
[START]
Key in the first
code to be printed
[START]
[Digital keys]
[START]
Key in the first
code to be printed
5 - 33
[Digital keys]
[START]
Key in the last
List starts to
code to be printed
be printed
[Digital keys]
[START]
Disconnect
Key in the last
List starts to
code to be printed
be printed
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SELF-DIAGNOSTIC MODE
[POWER]
OFF/ON
(Exit)
[POWER]
USB
OFF/ON
(Exit)
5