e. Set the AC harnesses on the upper side and the DC harness on the lower side. Hang each of
them on 2 hooks correspondingly.
f. Be sure that the AC harness is not set on the plate. Set the connectors on the latch.
g. Pull the AC harness in the direction of the arrows.
AC harness
e
DC harness
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
f
Dual type heater lamp
Plate AC harness
f
Triple type heater lamp
Plate
AC harness
g
AC harness
Fig. 4-492
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 169
Connector
Latch
Plate
Connector
Plate
Latch
DISASSEMBLY and REPLACEMENT
4