Error Code List; Jam - Toshiba e-STUDIO 5540C Service Manual

8.2

Error Code List

The following error codes is displayed at the upper right of the screen when the "CLEAR PAPER" or
"CALL SERVICE" symbol is blinking.
8.2.1

Jam

Error code Classification
E010 Paper transport jam
E011 Other paper jam
E020 Paper transport jam
E030 Other paper jam
E061
E062
E063
E064
E065
E071
E072
E073
E074
E075
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
Contents
Jam not reaching the fuser transport sensor
The paper which has passed through the
fuser unit does not reach the fuser transport
sensor.
Transfer belt paper-clinging jam: The paper
after the 2nd transfer is clinging to the
transfer belt, or a paper jam occurred
between the registration roller and the
paper clinging detection sensor.
Stop jam at the fuser transport sensor: The
trailing edge of the paper does not pass the
fuser transport sensor after its leading edge
has reached this sensor.
Power-ON jam: The paper is remaining on
the paper transport path when power is
turned ON.
Incorrect paper size setting for 1st drawer:
The size of paper in the 1st drawer differs
from size setting of the equipment.
Incorrect paper size setting for 2nd drawer:
The size of paper in the 2nd drawer differs
from size setting of the equipment.
Incorrect paper size setting for 3rd drawer:
The size of paper in the 3rd drawer differs
from size setting of the equipment.
Incorrect paper size setting for 4th drawer:
The size of paper in the 4th drawer differs
from size setting of the equipment.
Incorrect paper size setting for bypass tray:
The size of paper in the bypass tray differs
from size setting of the equipment.
1st drawer media type mis-setting jam: The
media type setting of the 1st drawer is
incorrect.
2nd drawer media type mis-setting jam:
The media type setting of the 2nd drawer is
incorrect.
3rd drawer media type mis-setting jam: The
media type setting of the 3rd drawer is
incorrect.
4th drawer media type mis-setting jam: The
media type setting of the 4th drawer is
incorrect.
Option LCF media type mis-setting jam:
The media type setting of the option LCF is
incorrect.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
8 - 6
Troubleshooting
P. 8-50
P. 8-66
P. 8-51
P. 8-51
P. 8-68
P. 8-68
P. 8-68
P. 8-68
P. 8-68
P. 8-69
P. 8-69
P. 8-69
P. 8-69
P. 8-69