Toshiba e-STUDIO 5540C Service Manual page 439

(8) Remove 2 screws.
(9) Take off the unit of exit guide and exit/
reverse guide.
(10) Disconnect 2 connectors, remove 2 screws
and take off the reading end guide.
(11) Remove 1 E-ring, 1 pulley, 1 pin, 1 timing
belt, 1 guide bushing and the bracket.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-771
Fig. 4-772
Reading end guide
Fig. 4-773
Bracket
Fig. 4-774
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 265
Exit/reverse guide
Exit guide
Guide bushing
Timing belt
Pin Pulley E-ring
DISASSEMBLY and REPLACEMENT
4