Tandem Lcf Feeding Unit; Stopper Opening/Closing Solenoid; Stopper Opening/Closing Detection Sensor - Toshiba e-STUDIO 5540C Service Manual

4.5.52

Tandem LCF feeding unit

(1) Take off the tandem LCF standby unit.
 P. 4-81"4.5.51 Tandem LCF standby unit"
(2) Remove 3 screws, and then take off the
tandem LCF feeding unit.
4.5.53 Stopper opening/closing solenoid (front) (SOL10)/Stopper
opening/closing detection sensor (front) (S110)
(1) Take off the tandem LCF feeding unit.
 P. 4-82"4.5.52 Tandem LCF feeding unit"
(2) Remove 4 screws, and then take off the
feeding unit front cover.
(3) Remove 2 screws, release 2 hooks and then
take off the stopper unit.
Notes:
The position of the hook differs depending on
the destination.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
Tandem LCF feeding unit
Stopper unit
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 82
Fig. 4-239
Feeding unit front cover
Fig. 4-240
Fig. 4-241