Installing Carriage Wires - Toshiba e-STUDIO 5540C Service Manual

[B] Installing carriage wires
(1) When replacing the carriage wires, refer
illustrations below:
Notes:
Adjustment of the carriage wire tension is not
necessary since a certain tension is applied
to the carriage wires by the tension
springs.Make sure the tension applied to the
wire is normal.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
[Front]
Carriage wire
Bracket for carriage-1
Wire pulley
Tension spring
[Rear]
Carriage-2
Carriage wire
Idler pulley
Tension spring
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 32
Carriage-2
Idler pulley
Hook
Fig. 4-88
Bracket for carriage-1
Hook
Wire pulley
Fig. 4-89