Toshiba e-STUDIO 5540C Service Manual page 812

Check item
LCF transport clutch
PFC board
Drive unit, Rollers
Replace parts
1st drawer transport sensor
Transport motor-1
LCF transport motor
LCF transport clutch
PFC board
Rollers
[E320] 3rd drawer transport jam (not reaching the 2nd drawer transport sensor)
[E350] 4th drawer transport jam (not reaching the 2nd drawer transport sensor)
[E3E0] LCF transport jam (not reaching the 2nd drawer transport sensor)
Classification
Paper transport jam
Check item
2nd drawer transport sensor
Feed motor
PFC board
Drive unit, Rollers
3rd drawer transport clutch
Replace parts
3rd drawer transport clutch
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
• Clutch check
(Perform the output check: 03-269)
• Connector check
• Harness check
• Connector check (CN512, CN513)
• Board check
• Gear check
• Roller check
The paper does not reach the 2nd drawer transport sensor
after it has passed the 3rd drawer feed sensor.(E320)
The paper does not reach the 2nd drawer transport sensor
after it has passed the 4th drawer feed sensor.(E350)
Paper fed from the LCF and passed through the LCF feed
sensor does not reach the 2nd drawer transport
sensor.(E3E0)
• Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[C])
• Connector check
• Harness check
• Motor check
(Perform the output check: 03-122/172)
• Connector check
• Harness check
• Connector check (CN502, CN513)
• Board check
• Gear check
• Roller check
• Clutch check
(Perform the output check: 03-252)
• Connector check
• Harness check
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
8 - 56
Measures
Remarks
Error item
Measures
Remarks